Zonet ZPS1000 Manuel d'instructions télécharger pdf (Page 43)

6. Network Print Monitor

Preparation

The print server supports TCP/IP, IPX/SPX and NetBEUI protocols under MS-Windows.

Please make sure that the following steps have been completed before proceeding with

installation under Windows PC.

Select A Desired Protocol

TCP/IP

 The TCP/IP Protocol must be installed. For further information, please read “TCP/IP

Protocol Installation” section in this chapter.

Note: If TCP/IP protocol is chosen, please refer to “Assigning an IP Address to the print

server” section later in this chapter.

IPX/SPX

The IPX/SPX-compatible Protocol must be installed. For further information, please read

“IPX/SPX-compatible Protocol Installation” section in this chapter.

NetBEUI

The NetBEUI protocol must be installed. For further information, please read “NetBEUI

Protocol Installation” section in this chapter.

TCP/IP Protocol Installation

1. Click Start, point to Settings and select Control Panel.

2. Double click the Network icon.

3. If the TCP/IP Protocol is not already installed, click Add.

4. Select Protocol and click Add.

5. Select Microsoft from the Manufacturers list.

6. Select TCP/IP Protocol from the Network Protocols list.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 72 73

Pas de commentaire

Zonet ZPS1000 Manuel d'instructions Page 43